Pow-R-Quik HS-223 HS-224

HS-223 and HS-224 Hydraulic Starters

Hydraulic Starters HS-223 and HS-224 are made out of a typical hydraulic gear motor and a common drive used with air starters. Both starters are sharing the same components with the exception of the hydraulic gears and the hydraulic motor housing.

From specifications stand point, HS-224 can start engines with displacements* from 10 liters to 49 liters as long as the flow and pressure available meets the hydraulic starter HS-224 specifications.

For low flow availability applications, the smaller hydraulic starter HS-223 can be used with engine displacements* between 10 liters and 30 liters.

Our HS-223 and HS-224 are designed with universality in mind fitting most of the engines available in the market with one part number (consult factory for proper match).

Weeping holes and case drain protections are standard for PRQ hydraulic starters

HS-223 and HS-224 Hydraulic Starters Highlights

  • Operating Pressure max: 3000psi (103-206bar)
  • Engine displacement*: 10-30 Liter for HS-223 and 10-49 Liter for HS-224
  • Pinion: 11Tooth
  • Rotation: Right Hand
  • Temperature: -40°F(-40°C) to 180°F(-82°C)

*The engine displacements are for reference only, the engine and the application breakaway torque must be considered and checked against starter specifications.
**Consult starter flow chart versus engine firing speed.

Request a Quote

    First Name* Last Name*
    Your Email* Phone*

    Select your starter below and enter requested quantity:

    Select Starter Quantity

    Add accessories to your quote request:

    Select ON/OFF Valve Quantity




    * = Required